Comparison with competitor

P(KWH)=V(voltage)*I(current*COS0'(pf)
P(KWH) is to determine power capacity reduction based on 3 factor as above

01.
At first, for voltage adjustment system(dropping voltage) and you can just compare height of water tank from ground with voltage.About low voltage(110~660V), for example if motor is less than property voltage, it can’t keep torque any more therefore it causes tremendous trouble and product life cycle.Most of factories are avoiding this, many troubles regarding this have been occurring in Japan, Korea, China and any other countries.By adopting series circuit, volume is 10~20times bigger than current type.Therefore it is often restricted when installing.The price is triple times expensive therefore it has disadvantage that the investment can be returned in 3~4years.Most manufacturers producing power saving appliance are same like this. They are making an effort to cover the disadvantage of dropping voltage.However to the original point, it is proportionate to formula stated as above.Most experts name it “A.V.R((Average Voltage Regular). We usually say it “Transformer”

02. At second “phase modifying eqiupment” called condenser is not applicable to household,business establishment, factory but it is nothing but “phase modifying eqiupment” as compensation for reducing “reactive power” in only KEPCO.COSθ is ratio of active power for apparent power In other words, it is ratio that how effectively voltage and current perform to electric equipment.However, the most important thing is that it hardly influences on active power quantity(KWH)which is a standard collected by KEPCO.On the view of supplier of KEPCO, it does not matter to flow current slightly. Then drop of electric pressure becomes little and has a advantage of usage effect of power supply equipment.
On disadvantage aspect, it is installed in main TR mostly received.Moreover unreal excessive installation causes “leading phase”, which make us pay more electric charge and has danger of fire. In conclusion , it is nothing but unreal phase modifying eqiupment.

03. At third, it’s current. If the height of voltage system is far from the water tank on the ground, just think current the thickness of pipe. KEPCO as receiver or supplier is making every effort in providing this current.Using electricity = it is equal to using current, Current is the existence to obstacle free electron flow named as resistance in A/C. In other words, it is to make water flow difficult in pipe.ULTRA is world 1st current improvement system by keeping voltage regularly applied superconductor.
Superconduction phenomenon in normal temperature (300K) has been already developed scientifically and is being approaching theoretically and presently applied products will appear.